Gorilla® Dries Clear Wood Glue is an easy to use, incredibly strong and water resistant PVA glue that dries crystal clear on wood surfaces.
Directions:
1. Clean and dry surfaces to be bonded.
2. Shake well before use.
3. Apply glue generously to the surface. *For ideal product performance, apply glue on wood to wood substrates.
4. Join and clamp for 20-30 minutes. Parts should fit tightly.
5. Excess glue can be removed with a clean, wet cloth or scraped off after glue dries.
6. Allow bond to dry for 24 hours.
7. Remove applicator tip to clean out glue build up.
NOTE: Application temperature should be at or above 55°F. Before finishing, sand surfaces to minimize glue exposure. Not recommended for structural or load bearing applications and not for continuous submersion or below-waterline use.
Pro Tip: For ideal formula performance, use adhesive on wood to wood substrates.
Click on the Gorilla link at the top of this page to see more Gorilla Tough products.
- Choosing a selection results in a full page refresh.
