Our same easy to use, thicker and more controlled Super Glue Gel formula, now in the intuitive pen-shaped applicator. Gorilla® Super Glue Gel Pen dispenses super glue in an uninterrupted line, while applying little pressure, providing maximum control.
BONDS: Plastic*, Wood, Metal, Ceramic, Rubber, Leather, Paper & More!
*Not recommended for use on polyethylene or polypropylene plastic.
Directions:
1. Protect work area from spills.
2. Clean and dry surfaces to be bonded.
3. To open, place cap onto top opening of pen. Turn cap clockwise until it no longer turns. The white base of the cap should not be visible when fully attached.
4. Remove cap by turning counterclockwise to reveal nozzle.
5. To dispense, press orange button. The harder you push, the more glue will dispense.
6. Apply a small amount of Gorilla® Super Glue Gel to one surface. Only one drop per sq. inch recommended. Set time can vary based on amount of glue and type of surface glued. Excess glue can cause delayed or failed bond.
7. Press the two surfaces together for about 10-45 seconds. Wait 24 hours for full cure.
8. After using, clean nozzle with a dry cloth and replace outer cap. Store in a cool, dry place away from children and animals.
- Choosing a selection results in a full page refresh.
