Gorilla Waterproof Patch & Seal Paste is a thick, flexible rubberized sealant paste that clings to multiple surfaces to instantly fill large gaps, cracks & holes. Once applied, the high strength formula smoothly covers the surface tightly sealing out water, air and moisture, resulting in lasting repairs!
GREAT FOR: Wood, glass, tile, concrete, aluminum, metal, brick, stucco, masonry, copper, fabric, fiberglass, ceramic, porcelain, natural stones, roofing, PVC, and more!
DIRECTIONS:
1) Clean surface of dirt, dust, grease and oil.
2) Using putty knife or trowel, apply to the surface. Ensure surface is completely covered and all gaps and holes have been filled.
3) Allow to cure in between coats. Full cure at 24-48 hours.
NOTE: Slight skinning may occur inside can if lid is not sealed tight. If present, remove skinned material to continue use and secure lid immediately after use.
STORAGE: Remove excess product from the rim of can with a dry cloth. Press or lightly tap lid shut to create tight seal.
DRY TIME: Paste begins to cure once exposed to air & moisture and will skin in 15 to 30 minutes. Full cure at 24-48 hours.
CLEAN UP: Wipe up any unwanted material with a dry cloth or paper towel immediately. Use mineral spirits to clean applicators such as putty knife or trowel.
- Choosing a selection results in a full page refresh.
